Parts you Need for the job
1 x MG Metro Turbo Inlet/exhaust unit. This comprises of the inlet manifold with carburettor, Turbo and turbo exhaust manifold.
1 x High-pressure fuel pump from a Metro turbo. (Jaguar cars use the same pump). Or any fuel pump off a car with fuel injection.
1 x Fuel pressure regulator, which must be boost sensing. The one on the Metro Turbo is.
1 x good Boost Gauge.
1 x length of copper pipe to make fuel tank return pipe.
1 x Plastic 3 way fish tank valve with screw adjustment. This is so that you can vary the boost pressure.
1 x 3-way (red) crankcase breather valve from a MetroTurbo.
1 x Free flowing exhaust system 1 7/8" to 2" in dia.
1 x Set of 1.5:1 high lift rockers. (Not vital)
1 x Set low compression Pistons. (Again not on my 1098 but always good for higher than 7psi)